The TS30 features the latest in test set case design, at an affordable price.
- High impedance DataSafeTM operation in monitor mode
- DropSafeTM reliability passes 20-foot drop test
- RainSafeTM protection in severe weather conditions
- Mute switch
- Last number redial
- Audible ringer for callbacks
Recognized as the industry standard for basic test sets, the TS30 Test Set provides superior quality at an affordable price. With its high impedance Monitor for DataSafe™ operation, technicians can clip onto a line in Monitor mode without disrupting existing traffic.
Fluke Networks’ unsurpassed RainSafe™ protection standards and DropSafe™ durability assure the test set will keep working even in the toughest environments. Solid weatherproofing provides enhanced resistance to severe weather conditions.
Electrical Specifications
- Return Loss: >14 dB (ref 600 Ω)
- Line Current Range: 15 mA to 120 mA
- Resistance to Continuous Current (Talk Mode): 275 Ω typical at 20 mA
- Monitor Mode Impedance: >120,000 Ω 300 Hz to 3400 Hz
Pulse Dial Output
- Pulsing Rate: 10 pps pps
- Open/Close Ratio: 60/40
- Inter-digit Interval: 800 ms %, -10%
- Resistance During Pulse Open: > 200,000 Ω
- Protection Against Alternating Current Overvoltage: The TS30 survives up to 250 Vrms across its test leads.
- Peak Acoustic Output of the Receiver: <120 dBspl
- DTMF Output Tone Frequencies Tone Frequency Error: per ITU-T Q.23 ±1.5% Maximum
Tone Level
High Group Low Group: -4 dBm (into 600 Ω) -6 dBm (into 600 Ω)
High vs Low Tone Difference: 2dB +1db
Last Number Redial (Tone/Pulse)
Memory Capacity Memory Retention: 23 digits 8-minutes nominal
Flash Duration: 600 ms ±100 ms
Ringer Loudness: > 70 dBA at 1 meter
Ringer Equivalent (REN): 0.14
